Saepingid > Formaatsaed > Formaatsaag Altendorf WA 80 > Formaatsaag Altendorf WA80-X

Formaatsaag Altendorf WA80-X

Formaatsaag Altendorf WA80-X
Müügiesindaja

Seadmete päringud

Aigar Sisask

+372 5623 6937

info.ttb@tooltrade.ee

Tootekood

€ kmta

€ kmga

Tartu
laos

Osta

4A10029 20460.00 24961.20 0

Altendorf Sliding table saws WA 80 X

Basic configuration
Control panel on comfortable eye level
All functions are easily accessed on the control panel on comfortable eye level. You can control the rise/fall and tilt of the main saw blade at the touch of a button. The tilt angle is shown on the digital display. And rip fence movment is controlled by computer.
CNC rip fence with computer control
Cutting width 1000 mm, Setting the fence is easy by computer; the precise adjustment facilitates great accuracy. The rip fence drops down clear of the machine table level to free up extra space for dividing large panels.
Sliding table
Table length 3000 mm
The large dumbbell rollers guide the moving table with absolute precision between the hard-chromed guide bars. Robust though it is, the table responds even to a light touch, gliding smoothly and securely as if it were on rails. And it retains this ease of movement even after decades of hard work, dust and dirt.
Saw blade projection
The saw blade projection of the WA 80 is 150 mm (saw blade diameter 450 mm).
Crosscut fence with fixed 90° angle
Stops to 3,200 mm. The crosscut fence with fixed 90° angle earns its keep every day by helping with precision cuts on workpieces of different lengths and formats. The fence can be easily slid from front to back without lifting. Adjustment using graduated scale.
Motor rating
4 kW (5.5 HP) with single speed (4000 rpm)
Powerful and smooth-running The saw is a powerhouse produced with the latest manufacturing technology. The saw shaft runs incredibly smoothly because it is electronically balanced as a fully assembled unit and extensive use is made of cast components. The high-precision vertical movement of the unit is linear with maintenance-free guide bearings. The robust tilt quadrants incorporate the traditional Altendorf tongue and groove connection system, which allows the whole unit to tilt easily and precisely to exactly the correct angle.
*Basic machine is without scoring unit
 
Fascinating performance
The WA 80 enables you to successfully take on any material challenge: no matter whether you are working with wood or plastic. With its well thought-out design and robust build quality, it makes light work of simple but precise squaring cuts through complex angles. Completely developed and assembled in Germany, the machine sets a new benchmark for sliding table saws in terms of price and quality. It will guarantee the success of your business.
Uncompromisingly strong, precise and reliable. The WA 80 stands for unique stability and the highest level of production safety. These qualities make the WA 80 the ideal partner for your successful projects.
Max. cutting length 4300 mm
Max. cutting height 150 mm
Max. cutting width 1300 mm
 
This is what makes the WA 80 so special
Control panel on the machine frame
You can control the height and tilt adjustment of the main saw blade at the press of a button. The tilt angle is shown on the digital display.
Rip fence with precise manual adjustment
Setting the fence is easy; the precise adjustment facilitates great accuracy. The rip fence drops down clear of the machine table level to free up extra space for dividing large panels.
Crosscut fence with fixed 90° angle
Stops to 3200 mm
 
The crosscut fence with fixed 90° angle earns its keep every day by helping with precision cuts on workpieces of different lengths and formats. The fence can be easily slid from front to back without lifting. Adjustment using graduated scale.
Sliding table
Table length 3000 mm
The large dumbbell rollers guide the moving table with absolute precision between the hard-chromed guide bars. Robust though it is, the table responds even to a light touch, gliding smoothly and securely as if it were on rails. And it retains this ease of movement even after decades of hard work, dust and dirt.
 
Configuration options
Sliding table lenghts:
  • Table length 2250 mm
  • Table length 3200 mm
  • Table length 3400 mm
  • Table length 3800 mm, with ground support
  • Table length 4300 mm, with ground support
+
  • On/Off switch on the double trolley
 
Scoring units and accessories
  • Scoring unit with electromotive height and manual side adjustment
  • RAPIDO-scoring system, adjustment range: 3 – 3,8 mm, ø = 120 mm
  • LED lighting on the scoring unit
 
Angle stops
  • with DIGIT L: Lengths up to 3200 mm, length can be adjusted via digital display with fine adjustment
  • Angle mitre stop: Lengths of up to 3500 mm, manual angle adjustment by 49°, with length compensation
  • With DIGIT L, lengths up to 3200 mm, length can be adjusted via digital display, angle dimension with length compensation adjustable via scale
  • With DIGIT LD, lengths up to 3200 mm, length and angle can be adjusted via digital display, with integrated length compensation

Parallelogram Cross Slide (PQS):

  • With digital angle display, lengths up to 3500 mm, manual adjustment, angle adjustment by 47° with digital display, length and angle measurement with length compensation, adjustable via scale, 2 individual tilt stops included.
  • With DIGIT LD, lengths up to 3200 mm, convertible stop, length and angle adjustable via digital display. With integrated length compensation, 2 individual tilt stops, fine adjustment, batteries and charging cable included
Accessories:
Cross slide extension for angle stop / angle mitre stop, extendable to 650 mm
 
Other accessories
  • PALIN/parallel cutting device, adjustable via scale
  • JETTY, second edition on the double trolley
  • Front support roller
  • Hold-down device, manual, clamping height up to 200 mm
  • Additional cross slide with double bottom support roller
 
Drive power and speed
  • 5.5 kW (7.5 HP) with 3 speeds, 3/4/5000 rpm, manually adjustable
  • 7.5 kW (10 HP) with 3 speeds, 3/4/5000 rpm, manually adjustable
 
Rip fence
Cutting width reduction to 800 mm, cnc controlled
Cutting width 1000 mm,  cnc controlled (standard)
Cutting width extension 1300 mm,  cnc controlled
 
Mitre stops
One-sided:
Lengths up to 2500 mm
Double-sided:
DUPLEX, lengths up to 1350 mm, adjustable via analogue angle and length scale with magnifying glass
DUPLEX, lengths up to 2150 mm, adjustable via analogue angle and length scale with magnifying glass
DUPLEX D, lengths up to 1350 mm, adjustable via digital angle display and analogue length scale, with length compensation
DUPLEX DD, lengths up to 1350 mm, adjustable via digital length and angle display, with length compensation